Showing posts with label Jeep Willy. Show all posts
Showing posts with label Jeep Willy. Show all posts

Saturday, August 21, 2010

Jeep CJ-10a

http://www.altelco.net/~emenaker/jeep/cj10a/cj10a_6.jpg

The CJ-10a was a CJ10-based flightline aircraft tug. Produced in Mexico from 1984 through 1986, were used by the United States Air Force for use as an aircraft pulling vehicle. About 2300 of them ever produced

Jeep CJ-10

http://www.ebroadcast.com.au/ecars/Jeep/CJ10/PiCs37/CJ10.FQ.jpg

http://jubileejeeps.org/faqs/cj10-fq.jpg

http://wagoneers.com/FSJ/rigs/1986-CJ10A/2009_Jul_12_cj-10a.jpg

http://www.4-the-love-of-jeeps.com/images/JeepCJ10.jpg

The CJ-10 was a CJ-based pickup truck. Produced from 1981 through 1985, it was sold mainly as an export vehicle, though some were used by the United States Air Force for use as an aircraft pulling vehicle. They featured square headlights mounted in the fenders and a 9-slot grille, a homage to the old Jeeps of WWII which originally had a 9 slot grille (the civilian model, the CJ-2 and 2a, were given a 7 slot grille as a distinction between the military and civilian models).

Jeep CJ-8 (Scrambler)

http://www.collinsbrosjeep.com/images/restorations/perry83cj8blk/DSC00138.JPG

http://carphotos.cardomain.com/ride_images/2/3582/4961/21454980001_large.jpg

http://image.4wheeloffroad.com/f/12158700/131_0902_04_z+jeep_cj8_scrambler_build+axle_suspension.jpg

http://www.autopressnews.com/2006/m01/jeep2/1982_Jeep_Scrambler_CJ-8.jpg

The (CJ-8) Scrambler was a pickup truck version of the CJ-7, introduced in 1981. It featured a 103-inch (2,616 mm) wheelbase and a pickup bed. Only 27,792 were built in the five years of production before being replaced by the similarly-sized Comanche.

The Jeep Scrambler(CJ-8) did not offer the Quadra-Trac system. The majority of Jeep Scramblers (CJ-8) used the traditional transfer case and manual front-locking hubs to engage the four-wheel drive. Most Scramblers(CJ-8) used a four- or five-speed standard transmission but a three-speed automatic transmission was an available option.

A full length steel hardtop CJ8 based on the Scrambler was made for the Alaskan Postal Service, using right hand drive and automatic transmissions. Instead of the rear tailgate the steel hardtop utilized a hinged barn door opening to the back. There were only 230 of these produced and sold in the US. This version was also widely sold in Venezuela and Australia as the "CJ8 Overlander", with small differences including full length rear windows on the Overlander. Jeep Australia (Circa 1984). "Jeep Overlander CJ8 Specifications and Dimensions". Press release. The steel hardtops used on these postal scramblers and Overlanders were known as "World Cab" tops.

Jeep CJ-7

http://static.cargurus.com/images/site/2008/09/21/19/47/1984_jeep_cj7-pic-15190.jpeg

Jeep CJ-7

http://www.blackhummer.com/jeep/cj7/cj7_6.jpg

Jeep CJ-7

http://0.tqn.com/d/4wheeldrive/1/0/0/R/1/Adam_RI_85JeepCJ7_RR.jpg

The CJ-7 featured a longer wheel base than the CJ-5 and lacked the noticeable curvature of the doors previously seen on the CJ-5. It was introduced in 1976 and 379,299 were built during 11 years of production.

The CJ-7 featured an optional new automatic all-wheel drive system called Quadra-Trac, as well as a part-time two speed transfer case; an automatic transmission was also an option. Other features included an optional molded hardtop, and steel doors. The CJ-7 was also available in Renegade and an upgraded Laredo model. Noticeable by their different body decals, the Laredo model featured nicer seats, steering wheel tilt, and a chrome package that included the bumpers, front grill, and mirrors. An optional Trak-Lok differential was available for the rear. Ring and Pinion was typically 3.54, but later went down to 2.73.

A diesel powered version was made in the Ohio factory for export only. The engines were provided by General Motors, the owners of Isuzu Motor Cars. Production of this diesel version is believed to have been only between 1980 and 1982. This model had the Isuzu C240 engine, T176 Transmission, Dana 300 Transfer box although there are reports of some being produced with the dana 20. Typically they had 4.1 ratio, narrow track axles.

CJ-5A and CJ-6A

http://boyink.com/images/jeep/1966_CJ6A_7.jpg

http://boyink.com/images/jeep/1966_CJ6A_1_thumb.jpg

http://images04.olx.com/ui/1/44/35/13973935_3.jpg

http://images02.olx.com/ui/1/44/35/13973935_4.jpg

http://www.jeep-l.net/images/pais64.gif

From 1964-1968 Kaiser elevated the Tuxedo Park from just a trim package to a separate model for the CJ-5A and CJ-6A. A Tuxedo Park Mark IV is signified by a different prefix from a normal CJ-5 with a VIN prefix of 8322, while a normal CJ-5 VIN prefix is 8305 from 1964-1971.

Jeep CJ-3B

http://cwbbs.net/manual/1944Jeep/JeepLeft.jpg

http://cwbbs.net/manual/1944Jeep/JeepRight.jpg

http://0.tqn.com/d/trucks/1/0/R/V/53_jeep_cj3b.jpg
The CJ-3B replaced the CJ-3A in 1953, the same year Willys was sold to Kaiser. It introduced a higher grille and hood to clear the new Willys Hurricane engine. The CJ-3B was produced until 1968 with a total of 155,494 produced, although the design was licensed to a number of international manufacturers, including Mitsubishi of Japan and Mahindra of India. Mitsubishi ceased production of vehicles derived from the CJ-3B design in 1998 after selling approximately 200,000 units. continues to produce Jeeps today.